Truper 11682, Руководство пользователя

Страница: 18 / 24

Impact
Socket
Parts
Handle
Gear
Case
Square
Drive
Retaining
Pin
Motor
Housing
Switch
Power
Cord
Power cord
protector
6
Assembly
Socket Installation
• Disconnect the tool from the power source before
changing the socket .
• Select the right socket for the job.
• Align the orifice for the socket retaining pin with the
retaining pin in the square drive.
• Press the socket into the square drive until is set into
position.
• To remove the socket, press the retaining pin through
the orifice and pull the socket until removing it from the
square drive.
• Always use impact socket for this tool. Do not use
sockets for hand tools. Consult the
Catalog to learn about our accessory range.
• Use 1/2” sockets for square drives.
• Using adaptors for sockets with other measures is not
recommended. Use them only when strictly necessary.
• If a socket has not been secured and
adjusted as indicated it can shoot out and injure the
operator.
Nut or Lug Inlet
Square Drive Inlet
Retaining
Pin Orifice
Retaining
Pin
Retaining
Pin Orifice
ENGLISH
WARNING