Unscrew
Insert the bit into
the magnetic extension into
the bits’ holder and press firmly
until it stops.
Insert the bit into
the magnetic extension and
press firmly until it stops
Turning ON and Operation Control
Installing the Bit
• When pressing the switch the LED light is ON.
• Do not stare directly to the light beam. Do not
point it towards other people’s eyes.
• Keep the switch (
A
) pressed to keep the screwdriver in
motion. Release the switch to stop the screwdriver motion.
• You may start screwing without turning ON the
screwdriver but, do not try to screw completely this way.
• Move the rotation direction selector to the left to screw.
• Move the rotation direction selector to the right to
unscrew.
7
Start Up
LED Light
The tips can be inserted directly in
the magnetic bit support (
D
).
You may use the magnetic extension (
E
):
1
. Insert the magnetic extension all the way down to the bit magnetic bits support.
2
. Select the bit that matches the screw.
3
. Insert the selected bit up to the stopper in the magnetic extension.
Insert the bit into
the magnetic bits’ support
and press firmly until it stops.
Screw
B
A
A
D
E
ENGLISH
Torque Adjustment
• To select the desired torque level, turn the torque
regulator (
B
) until matching the desired level with the
upper mark ( ).
• To obtain their maximum torque, urn the torque
regulator to the position of the following image
