DO
GUIDE
DM-PSU-8-PLUS/DM-PSU-16-PLUS
8-Port/16-Port PoDM+ Power Supply for DM 8G+
®
I/O Cards
DM-PSU-16-PLUS Rear Panel Connections
NOTE:
Ensure that the device is properly grounded by connecting the chassis ground lug to
an earth ground circuit (for example, building steel).
NOTE:
The 8 POWER ports of the DM-PSU-8-PLUS and the 16 POWER ports of the
DM-PSU-16-PLUS are PoDM+ and HDBaseT
®
PoE+ power sourcing equipment ports (PSEs).
Each port supports one PoDM, PoDM+, HDBaseT PoE, or HDBaseT PoE+ powered device.
Cabling that connects to a PoDM+ or HDBaseT PoE+ PSE port is designed for intrabuilding use only.
DO
Identify the LEDs
PWR:
Lights green to indicate that the DM-PSU-8-PLUS or DM-PSU-16-PLUS is receiving
ac power
POWER 1-8
or
1-16:
Light green to indicate that PoDM, PoDM+, HDBaseT PoE, or HDBaseT
PoE+ is supplying power to a compatible device that is connected to the corresponding port via
a DMC Series I/O card
DM-PSU-8-PLUS Front Panel LEDs
DM-PSU-16-PLUS Front Panel LEDs
DO
Install the Device
The Crestron
®
DM-PSU-8-PLUS and DM-PSU-16-PLUS can be mounted into a rack or placed onto a
flat surface.
NOTE:
The DM-PSU-8-PLUS and DM-PSU-16-PLUS do not require firmware updates.
Mount into a Rack
The DM-PSU-8-PLUS and DM-PSU-16-PLUS each occupy 1U of rack space. Using a #1 Phillips
screwdriver, attach the two included rack ears to the device using the six included 4-40 x 3/8”
Phillips pan head screws. Then, mount the device into the rack using four mounting screws
(not included).
Rack Ear Attachment
Place onto a Flat Surface
When placing the device onto a flat surface or stacking it with other equipment, attach the included
feet near the corners on the underside of the device.
DO
Connect the Device
Connect the device as required for the application.
DM-PSU-8-PLUS Rear Panel Connections
DO
Check the Box
QTY
ITEM
PART NUM.
2
Bracket, Rack Ear, 1U
2043941
4
Foot, 0.5" x 0.5" x 0.23", Rubber
2002389
1
Power Cord, 6' 7" (2 m)
4505164
6
Screw, 4-40 x 3/8", Pan Head, Phillips
2007170
POWER
MAX 30W/PORT 1–8:
To POE IN port of DMC Series
DM 8G+
®
I/O card
or to HDBaseT
®
device
Ground
100–240V~50/60 Hz
3.3–1.5A:
From ac power outlet
POWER
MAX 30W/PORT 1–16:
To POE IN port of DMC Series
DM 8G+ I/O card
or to HDBaseT device
100–240V~50/60 Hz
6.6–2.7A:
From ac power outlet
Ground
