1
2
3
4
Start Up
Turning ON
Spraying
• Always hold the gun and lance with both
hands to control the sudden movement
caused by the pressurized water sudden
movement.
• Point the lance toward the ground and pull
the gun trigger to start spraying.
• To stop spraying, release the trigger.
1. Turn on the water faucet and keep it on while using the pressure washer. Maximum inlet pressure: 50 PSI.
2. Connect the plug to the outlet.
3. Squeeze and hold the high-pressure gun trigger to release air trapped in the pressure washer. Release the trigger when the
water flow is constant.
4. Turn the switch to the ON position. The motor will start momentarily and then stop.
Do not use the device if the power cord or important parts of the
device are damaged, e.g., safety devices, high pressure nozzles, trigger
gun, etc.
8
• Turbo spray nozzle:
High pressure spray pattern for optimum cleaning. Keep
the nozzle at a minimum distance of 8” from the surface
to be washed.
• Multiple nozzle:
Rotate nozzle head to regulate pressure and spray angle.
Release the gun trigger to stop the water flow before
adjusting the nozzle.
• Detergent dispensing nozzle:
Turn clockwise the nozzle container and fill with detergent
product and turn counterclockwise the nozzle to fit the
container. The detergent will mix with the water
automatically. Use the top knob to dose the detergent.
Use only detergents designed for
pressure washers. Never use products with bleach, chlorine,
or other corrosive agents such as solvents, trisodium
phosphate products, ammonia, or acid-based cleaners.
These products will cause damage to the machine
components.
OFF/O
ON/I
ENGLISH
Lances and nozzles
WARNING
