Trumpf TruTool TKF 1500, Руководство оператора

Страница: 22 / 36

1 Supporting body
2 Screws
3 Special tool
4 Stripper
5 Pressure die
6 Hexagon head screw
7 Set screw
8 Screw
9 Set screw
For roller holder for tubes with an inside diameter of
30-120 mm
Fig. 54265
1. Undo and remove both of the screws on the stripper using
the screwdriver provided.
2. Undo the screws (2) using the open-end wrench provided.
3. Completely extend the guide bracket on the supporting body
(1) and remove it from the machine.
4. Loosen the hexagon head screw (6) on the special tool (3),
but do not unscrew it completely.
5. Undo the screw (8) on the lever.
6. Remove the pressure die (5) from the special tool.
7. Unscrew both screws from the special tool (3) and remove
the stripper (4).
8. Then retract the special tool into the supporting body (1).
9. Tighten the screws (2) on the supporting body.
10. Reinstall the stripper (4) from the special tool (2) with two
screws.
11. Retract the pressure die (5) again and tighten the screw (8).
12. Tighten the hexagon-head screw (6) on the special tool.
13. To adjust the wall thickness: unscrew screws (6) and (8).
14. Set the wall thickness using the set screw (9).
15. Adjust the chamfer size via the set screw (7).
22
Options E681en_02
Removing the guide bracket
Installing the special tool
Adjusting the special tool