Trumpf TruBend 2000 Series, Руководство оператора

Страница: 60 / 74

Lifting the machine from the ground and
transport with armored rollers
Conditions
■
The machine was separated from the energy source by
qualified personnel.
■ The transport securing devices are installed.
■ Anchoring has been detached.
Means, Tools, Materials
■
4 wooden blocks 140 x 80 x 500 mm (included in the scope
of delivery of the machine).
■ 4 screws (included in the scope of delivery of the machine).
The machine tilts forward!
Risk of fatal injury!
Ø There must be no one in the danger zone during transport.
Ø The machine may only be transported with the transport
securing devices mounted.
Ø The machine may be operated only if it is anchored firmly
in the foundation.
1 Wooden block 2 Hydraulic hoisting jack
Fig. 86885
1. Apply the hydraulic hoisting jacks and raise the machine by
100 mm (3.9 in).
2. Place the wooden block at a height of 80 mm (3.2 in).
3. Raise the machine to 150 mm (5.9 in).
4. Rotate the wooden blocks to a height of 140 mm (5.5 in).
5. Lower the machine.
2 ‐ 32
Transport - Version 1 B1161en
DANGER
Lift the machine and
position on wooden blocks