10
Tool assembly
E517EN_03.DOC
3. Tool
assembly
3.1 Setting the tool
The clearance between the rollers and the guide rails can be
locked into place in order to be able to place the machine at the
desired position of the channel (and) to be able to remove it from
the machining position at the end of the channel:
•
Adjustment lever (1) in position against the direction of feed:
Tool open.
•
Adjustment lever (1) in end position in direction of feed:
•
Tool in work position.
1 Adjustment
lever
Tool open
1 Adjustment
lever
Tool in work position
Tool open
Fig. 37864
Tool in work position
Fig. 37863
