22
1. On/Off. Press this button to start actively using your chair. Make sure the chair is
plugged in, and press the ON switch on the chair to begin your massage session. If you
press this button while the chair is functioning, it will return to its default position and
turn off. The remote will also turn off within 3 to 5 seconds.
2. Quick relaxation. Use this button to initiate an automatic 8 minute program focused
on relaxation.
3. Emergency off. This button will stop all massage functions, and the chair will return
to its default position and turn off. To return to your massage, restart the remote
control using the On/Off button.
4. Menu. Press this button to explore the numerous functions available. To exit the
menu, press the button once more.
5. Auto. The MC-2000 is equipped with 5 automatic programs available through this
button. With each subsequent push, you can switch the current program. Automatic
programs available include “Recovery,” “Pain Relief,” “Stretch,” “Music Sync,”
“Experience,” and “Stop.” Look at the LCD screen to see the program currently running.
6. Raise leg rest. Hold this button continually to raise the leg rest to your preferred
height. Release the button when you achieve your desired height.
7. Lower leg rest. Hold this button continually to lower the leg rest to your preferred height.
8. The direction pad. Use the 4 buttons on the direction pad to move up, down, left, or
right on any menu screen. Additionally, you can touch up or down to select the menu
and left or right to go to the previous or next menu screen. During point massages
and after the acupuncture-point tracking detection test, you may also use the pad to
adjust the massage experience.
9. OK. Use this key to select a menu choice and enter the next screen.
10. Raise backrest and lower leg rest. Hold this button continually to move the
backrest toward a seated position and to lower the leg rest. Release the button to lock
your position of choice.
11. Lower backrest and raise leg rest. Hold this button to recline the backrest and raise
the leg rest. Release the button to lock your position of choice.
12. Zero. Press this button to initiate the zero-gravity position. Your chair will adjust
itself and then stop. If you wish to return to the default position, simply press the Zero
button once more.