15
INSTALLATION
5. Attach the Shoulder Massagers
Note: The left shoulder device goes into the left side of the backrest, and the right
shoulder device goes into the right side of the backrest. Line the sides up before you
begin to ensure that you have the proper placement.
A. Locate and unscrew the bolt on the back interior of the armrest.
B. Use 2 hands to lift and orient the shoulder device for installation. Connect the
speaker wires and air tubes in the shoulder device to the backrest.
C. Match up the 3 axle holes on the armrest with the axles on the backrest. Press
the axles into the holes.
D. Shift the shoulder device down until it does not move any further.
E. Unzip the shoulder device airbag, then locate and align the bolt hole underneath
the airbags with the bolt hole on the armrest. Screw in the bolt, and then zip the
device airbag into the device to complete the installation.
F. 6. Repeat steps 1–5 on the opposite side of the chair.
Bolt
Zipper for
Shoulder
Airbags
A
E
B
C
Note on Disassembly:
If you need to disassemble the shoulder device, unzip the
airbag first. Reverse all instructions to remove the device without damaging the
covering or the wires.