TrueConf Group, Руководство пользователя

Страница: 15 / 32

3. Choose the protocol to stream
⁠
content to be shared in
⁠
BFCP transport menu: UDP or TCP.
4. If necessary, enable
⁠
SRTP encryption .
5. In
⁠
N AT traversal menu, you can set how to use ICE and TUR N protocols and indicate the NAT
server address and its authorization data.
6. You can register the endpoint with the external S IP server in
⁠
Registration menu where you can
indicate the registration data and transport protocol to be used.
3.5.3. RTP Settings
In
⁠
Configuration → Network → RTP section, you can set:
Limited size of MTU data to be transmitted (RTP packet size excluding UDP and IP headers)
QoS DSCP marking on all traffic types
3.6. Sleep Mode
You can change the sleep mode settings. In this case, the endpoint reduces energy consumption and
can take incoming calls. In case of a video call, it wakes up from sleep mode and turn on the peripheral
equipment.
You can change settings in
⁠
Configuration → Powersave section:
1. Choose the length of time before the endpoint goes into sleep mode.
2. Indicate if this should:
Turn off monitors and cameras
Put the camera into sleep mode (if supported by the manufacturer)
3.7. Preparing for Conferences
3.7.1. MCU Function Activation
By default, ⁠ TrueConf Group operates in ⁠ point-to-point mode when the video call is made in full-
duplex mode that allows two parties to see and hear each other simultaneously. If another user calls
the endpoint during the ongoing session, he/she will not be able to join and will see a message that
the device is busy.
At the customer's request, the endpoint can be equipped with an embedded MCU server. When ⁠
TrueConf Group operates in this mode, the video call is put into ⁠ group conference mode. In this case,
users who are calling the endpoint automatically join an ongoing conference (according to the number
of external connections allowed by the license).
Take the following steps to enable this feature:
1. Go to ⁠ Configuration → Call → MCU settings section.
2. In ⁠ MCU support , choose ⁠ On .
3. Indicate ⁠ Mixing mode for video streams:
Symmetric : All conference attendees see and hear each other
Video lecture : Attendees who joined the conference see and hear only the host represented by
the endpoint
Voice activated : All attendees have a layout as in a symmetric conference, but a speaker will be
displayed in the priority video window.
4. If necessary, enable the display of the volume indicator in each video window.
5. If you do not want a layout to automatically create a new video window for a
⁠
presentation or
⁠
TrueConf Group User guide
© 2021 TrueConf. All rights reserved. 15