background image

4

If, at any point during operation a Danger, Warning, or Caution indication is present, the operator 
should immediately take steps to resolve the problem and/or seek assistance from a supervisor. 

Safety

IMPORTANT SAFETY INFORMATION

Read this manual before installing, operating, and maintaining this equipment. Failure to read the 
manual can result in personal injury and/or equipment damage. 

Do not attempt to remove and/or modify any TrueClean products or programming.

 Doing so can 

create unsafe conditions for the operator(s) and/or surrounding persons. Any change to TrueClean 
products or programming will void any and all warranties. 

Do not place any TrueClean product in an application where general product service ratings are 
exceeded. 

Doing so puts the operator(s) and/or surrounding persons at risk of personal injury and/

or result in equipment damage.

Do not remove any labeling on any TrueClean product. 

Immediately replace any label that is 

missing.

DISCLAIMER OF LIABILITY

TrueClean does not assume responsibility and expressly disclaims liability for loss, damage, or 
expenses that arise in any way from the installation, operation, use, or maintenance performed in 
accordance with this manual. TrueClean assumes no responsibility for any infringement of patents 
or other rights of third parties that may result from use of the module. No license is granted by 
implication or otherwise under any patent or patent rights. 

TrueClean reserves the right to make changes to the product, specifications, or this manual without 
prior notice.

DANGER

Indicates an imminently hazardous situation, which if not avoided, has a 
high likelihood of resulting in death or serious injury. This symbol is used 
in only the most extreme at-risk cases and warrants immediate action.

WARNING

Indicates a potentially hazardous situation, which if not avoided, could 
result in death or serious injury. This symbol is used for moderately at-risk 
cases and warrants immediate action.

Indicates a potentially hazardous situation, which if not avoided, may 
result in minor or moderate injury. This symbol may also be used to alert 
against an unsafe operating or maintenance practice.

CAUTION

The words 

DANGER

WARNING

, and 

CAUTION

 and their meanings, as used within these 

instructions, are listed below:

Содержание ToteTilter TTT-05-304A

















Отзывы: