background image

TRUE RESIDENTIAL

®

TEC_TM_073 | REV. D | EN

12/03/2021

Page 52 of 56

1

TRUE RESIDENTIAL

®

 LIMITED ICE MACHINE WARRANTY

TRUE RESIDENTIAL

®

 LIMITED ICE MACHINE WARR ANT Y

LIMITED 30-DAY COSMETIC WARRANTY  

Stainless steel doors and handles are warranted to 
be free from defective materials and workmanship 
for a period of thirty (30) days from the date of 
original retail purchase. Any defects must be 
reported to the selling dealer within thirty (30) days 
from the date of original retail purchase. This limited 
warranty excludes any type of freight / concealed 
damage. 

THREE-YEAR PARTS & LABOR WARRANTY 

TRUE warrants to the original purchaser of every new 
True Ice™ machine, the cabinet and all parts thereof, 
to be free from defects in material and workmanship 
under normal and proper use and maintenance as 
specified by TRUE and upon proper installation and 
start-up in accordance with the instruction packet 
supplied with each TRUE unit. TRUE’s obligation 
under this warranty is limited to a period of three 
(3) years from the date of original installation or 
thirty-nine (39) months after shipment date from 
TRUE, whichever occurs first. 

   

Contact the factory regarding warranty for installations 
in a commercial/light commercial application.

SIX-YEAR SEALED SYSTEM WARRANTY - PARTS & LABOR

TRUE warrants its hermetically sealed system: 
compressor, evaporator coil, condenser coil, drier, 
metering device and connecting tubing to be free 
from defects in both material and workmanship under 
normal and proper use and maintenance service for 
a period of six (6) years from the date of original 
installation but not to exceed six (6) years and three 
(3) months after shipment from the manufacturer, 
whichever occurs first.

DISPLAY PRODUCTS

True Residential Products on showroom display that 
are sold more than 3 years (36 months) from the 
invoice date to the dealer would carry a 1 year parts 
and labor warranty, along with an additional 4 year 
sealed system, parts only warranty. 

TERMS APPLICABLE TO EACH WARRANTY

Any part covered under the above warranties that is 
determined by TRUE to have been defective within 
the time frame is limited to the repair or replacement, 
including labor charges, of defective parts or 
assemblies. The labor warranty shall include standard 
straight time labor charges only and reasonable travel 
time, as determined by TRUE.

WARRANTY CLAIMS    

   

All claims for labor or parts must be made directly 
through TRUE. All claims should include: model 
number and serial number of ice machine, proof 
of purchase, and date of installation. In case of 
warranted compressor, the compressor model tag, or 
picture of tag must be returned to TRUE along with 
the above listed information. Warranty labor claim is 
subject to denial if failed part is requested for return 
and it is not returned.

WHAT IS NOT COVERED BY THIS WARRANTY

TRUE’s sole obligation under this warranty is limited 
to either repair or replacement of parts, subject to the 
additional limitations below. 

This warranty neither assumes nor authorizes any 
person to assume obligations other than those 
expressly covered by this warranty. This warranty 
does not cover failures related to the water supply, 
problems in the plumbing going to the unit, or external 
drain line malfunctions. Also not covered are failures 
resulting from ambient conditions that are outside the 
limits specified in the owners manual.

NO CONSEQUENTIAL DAMAGES

TRUE is not responsible for economic loss, profit loss or 
special, indirect or consequential damages, including 
without limitation, losses or damages arising from ice 
loss or ice replacement costs, normal maintenance,  
after-install adjustments or cleaning or water damage 
claims whether or not on account of refrigeration 
failure. 

1

TRUE RESIDENTIAL

®

 LIMITED ICE MACHINE WARRANTY

TRUE RESIDENTIAL

®

 LIMITED ICE MACHINE WARR ANT Y

LIMITED 30-DAY COSMETIC WARRANTY  

Stainless steel doors and handles are warranted to 
be free from defective materials and workmanship 
for a period of thirty (30) days from the date of 
original retail purchase. Any defects must be 
reported to the selling dealer within thirty (30) days 
from the date of original retail purchase. This limited 
warranty excludes any type of freight / concealed 
damage. 

THREE-YEAR PARTS & LABOR WARRANTY 

TRUE warrants to the original purchaser of every new 
True Ice™ machine, the cabinet and all parts thereof, 
to be free from defects in material and workmanship 
under normal and proper use and maintenance as 
specified by TRUE and upon proper installation and 
start-up in accordance with the instruction packet 
supplied with each TRUE unit. TRUE’s obligation 
under this warranty is limited to a period of three 
(3) years from the date of original installation or 
thirty-nine (39) months after shipment date from 
TRUE, whichever occurs first. 

   

Contact the factory regarding warranty for installations 
in a commercial/light commercial application.

SIX-YEAR SEALED SYSTEM WARRANTY - PARTS & LABOR

TRUE warrants its hermetically sealed system: 
compressor, evaporator coil, condenser coil, drier, 
metering device and connecting tubing to be free 
from defects in both material and workmanship under 
normal and proper use and maintenance service for 
a period of six (6) years from the date of original 
installation but not to exceed six (6) years and three 
(3) months after shipment from the manufacturer, 
whichever occurs first.

DISPLAY PRODUCTS

True Residential Products on showroom display that 
are sold more than 3 years (36 months) from the 
invoice date to the dealer would carry a 1 year parts 
and labor warranty, along with an additional 4 year 
sealed system, parts only warranty. 

TERMS APPLICABLE TO EACH WARRANTY

Any part covered under the above warranties that is 
determined by TRUE to have been defective within 
the time frame is limited to the repair or replacement, 
including labor charges, of defective parts or 
assemblies. The labor warranty shall include standard 
straight time labor charges only and reasonable travel 
time, as determined by TRUE.

WARRANTY CLAIMS    

   

All claims for labor or parts must be made directly 
through TRUE. All claims should include: model 
number and serial number of ice machine, proof 
of purchase, and date of installation. In case of 
warranted compressor, the compressor model tag, or 
picture of tag must be returned to TRUE along with 
the above listed information. Warranty labor claim is 
subject to denial if failed part is requested for return 
and it is not returned.

WHAT IS NOT COVERED BY THIS WARRANTY

TRUE’s sole obligation under this warranty is limited 
to either repair or replacement of parts, subject to the 
additional limitations below. 

This warranty neither assumes nor authorizes any 
person to assume obligations other than those 
expressly covered by this warranty. This warranty 
does not cover failures related to the water supply, 
problems in the plumbing going to the unit, or external 
drain line malfunctions. Also not covered are failures 
resulting from ambient conditions that are outside the 
limits specified in the owners manual.

NO CONSEQUENTIAL DAMAGES

TRUE is not responsible for economic loss, profit loss or 
special, indirect or consequential damages, including 
without limitation, losses or damages arising from ice 
loss or ice replacement costs, normal maintenance,  
after-install adjustments or cleaning or water damage 
claims whether or not on account of refrigeration 
failure. 

Содержание TUI-15-R/L-OP-B

























































Отзывы: