7
TRUE
trcb
–
chef
base
equipment
www
.
truemfg
.
com
SETUP
DRAWER SET 2
REMOVAL
Slide out drawer and locate white drawer retainer.
Push white drawer retainer towards drawer front panel.
Pull up on the white drawer retainer and disengage from drawer.
Image 5.
Pull out and remove drawers.
INSTALLATION
Verify white drawer retainer is in the up position. Image 6.
Insert drawer onto drawer slide and push into position. Image 7.
Secure drawer to slide by pushing down on the white drawer retainer
and pushing back to lock. Image 8.
Verify drawer operation.
5
6
7
8
STANDARD ACCESSORIES
DRAWER REMOVAL & INSTALLATION
Depending on the version and model of the cabinet, one of the fol-
lowing drawer configurations will be standard.
DRAWER SET 1
REMOVAL
Open drawer completely. Roller clips will be in the down position.
Images 1 & 2.
While holding the sides of the drawer, use your finger to rotate the
clips upward. Image 3.
Lift drawer and remove from channel. Image 4.
INSTALLATION
Lower rear rollers into channel slots.
With the roller clips in the upward position, lower front rollers into
channel.
Make sure roller clips are in the down position.
1
2
3
4
