STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation
Right
Plan
3D
PLAN VIEW
KCL
TR2HRI-2S TFQY97E
TFQY51S
TFQY155P
TFQY973
TR2HRI-2S
DESIGN
• True’s solid door roll-in heated
cabinets are designed with enduring
quality that protects your long term
investment.
HEATER SYSTEM
• Cabinet is designed to provide holding
temperatures of 80°F to 180°F (26.6°C
to 82.2°C). Heating system controlled
by exterior on/off switch and
temperature control dial.
• Two (2) stainless steel (for corrosion
resistance), fi nned tube heating
elements (1000 watts each) per section
for uniform generation of electric
heat. Cabinet comes with a total of
4000 watts.
• Equipped with low-velocity fans to
assure even temperature distribution
throughout the cabinet. Fans are
controlled by exterior on/off switch.
• Manually controlled vent located
on top of the cabinet for positive
humidity control.
• 12" x 20" (305 mm x 508 mm) pan for
water included, if additional humidity
required.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel
doors, front, sides, back and bottom.
• Interior - 300 series stainless steel liner
and fl oor.
• Stainless steel breaker caps.
• Insulation - entire cabinet structure
and solid doors are foamed-in-
place using high density, CFC free,
polyurethane insulation.
• One (1) heavy gauge stainless steel
ramp per door.
• Designed to accept roll-in racks
(inboard castors) with a maximum
dimension of 27"L x 29"D x 66"H
(686 mm x 737 mm x 1677 mm).
DOORS
• 300 series stainless steel exterior and
liner. Doors open within cabinet
dimension.
• Door locks standard.
• Lifetime guaranteed recessed door
handles. Each door fi tted with 12"
(305 mm) long recessed handle that
is foamed-in-place with a sheet
metal interlock to ensure permanent
attachment.
• Wiper gaskets for positive seal,
reversible.
• Three (3) lifetime guaranteed, cam-
lift hinges per door. Full 180° open
capability with a stay open feature at
120°.
• Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
• Doors are fi eld reversible.
LIGHTING
• Incandescent interior lighting - lights
activated by exterior on/off switch,
safety shielded.
MODEL FEATURES
• Exterior, color coded, temperature
display; accurate direct reading of
internal cabinet temperature.
• Designed to hold warm baked or
cooked food. Cabinet is not designed
to heat ambient or cold product.
• Interior bumpers protect cabinet walls
from abuse caused by roll-in carts.
• NSF-4 compliant for open food
product.
ELECTRICAL
• True requires that a sole use circuit be
dedicated for the unit.
• Unit comes with 4 feed wires
(including ground) to be hardwired
at installation site to a 115/208-240/60
Hz. single phase, 20 amp dedicated
outlet.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒
Metal door handles (factory installed).
❒
Electronic temperature control
(factory installed).
❒
Correctional facilities options.
TR Specifi cation Series:
Roll-In Solid Door Heated Cabinet
1
1
/
32
"
(27 mm)
ELEVATION
PLAN VIEW
83
3
/
4
"
(2128 mm)
84
3
/
4
"
(2153 mm)
34
7
/
16
"
(875 mm)
30"
(762 mm)
64
7
/
16
"
(1637 mm)
68"
(1728 mm)
FEED WIRE LOCATION
RIGHT VIEW
38
11
/
16
"
(983 mm)
4
1
/
4
"
(108 mm)
FEED WIRE
LOCATION
1"
(26 mm)
