TOAM | OPEN AIR MERCHANDISER
TEC_TM_012 REV. B
09/25/2020
Page 13 of 20
truemfg.com
Startup
• The compressor is ready to operate when the unit is purchased.
All you need to do is plug in the cooler.
• Excessive tampering with the control could lead to service
difficulties. If replacing the temperature control is ever needed,
be sure to order the replacement from your TRUE dealer or
recommended service agent.
• Good air flow inside your TRUE unit is critical. Take care to
prevent product from pressing against the sides or back
wall and coming within 4" (101.6 mm) of the evaporator
housing. Refrigerated air off the evaporator coil must circulate
throughout the cabinet for even product temperatures.
NOTE:
If the unit is disconnected or shut off, wait 5 minutes
before restarting.
RECOMMENDATION
– Before loading product, run your TRUE
unit empty for 24 hours to verify proper operation. Remember,
our factory warranty
DOES NOT
cover product loss!
Temperature Control & Light Switch Location
The light symbol
shows the approximate location of the light
switch.
Cabinet Operation
FOR MORE INFORMATION
For more information regarding a cabinets general sequence of operation, including
basic temperature control adjustments, please visit our website:
www.truemfg.com/support/resource-library
Electronic Temperature Control
Behind the front grill OR through the
front grill.
ECO
°C
°
F
Light Switch
In front of the top air flow honeycomb..
