background image

............ www.truemfg.com ............

True Food Service Equipment, Inc.

3

3

SAFETY INFORMATION

The power cord of this appliance is equipped 
with a 3-prong (grounding) plug which mates 
with a standard 3-prong (grounding) wall outlet to 
minimize the possibility of electric shock hazard 
from this appliance.

Have the wall outlet and circuit checked by a 
qualified electrician to make sure the outlet is 
properly grounded.

If the outlet is a standard 2-prong outlet, it is your 
personal responsibility and obligation to have it 
replaced with the properly grounded 3-prong wall 
outlet.

The heated cabinet should always be plugged into 
it’s own individual electrical circuit, which has a 
voltage rating that matches the rating plate.

This provides the best performance and also 
prevents overloading building wiring circuits which 
could cause a fire hazard from overheated wires.

Never unplug your cabinet by pulling on the power 
cord.  Always grip plug firmly and pull straight out 
from the outlet.

Repair or replace immediately all power cords that 
have become frayed or otherwise damaged. Do not 
use a cord that shows cracks or abrasion damage 
along its length or at either end.

When removing the cabinet away from the wall, be 
careful not to roll over or damage the power cord.

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safety, this appliance must be properly grounded.

WARNING!

USE OF EXTENSION CORDS 

/ ADAPTER PLUGS 

Do not use adapter plugs or extension leads as these can cause safety issues and early failure of electrical components.  
The use of adapters and extension cords will invalidate your warranty.  NEVER USE AN EXTENSION CORD!  NEVER USE AN 
ADAPTER PLUG!

WARNING

Power supply cord ground should not be removed!

NOTE

To reference wiring diagram - Remove lower rear grill.  

Wiring diagram is positioned on the inside cabinet wall.

NEMA plugs

TRUE uses these types of 

plugs.  If you do not have the 

right outlet have a certifi ed 

electrician install the correct 

power source.

Содержание TH-23














Отзывы: