background image

............ www.truemfg.com ............

I N S TA L L AT I O N   M A N U A L   F O R   T C M   M O D E L S

( C O N V E N I E N C E   M E R C H A N D I S E R )

T C M   M O D E L S

( C O N V E N I E N C E   M E R C H A N D I S E R )

CONGRATULATIONS!

You have just purchased the finest commercial

refrigeration available. You can expect many years

of trouble-free operation.

TRUE FOOD SERVICE EQUIPMENT, INC.

2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366

(636)-240-2400 • FAX (636)272-2408 • INT’L FAX (636)272-7546 • (800)325-6152

Parts Department (800)424-TRUE • Parts Department FAX# (636)272-9471

TABLE OF CONTENTS

Safety Information
Safety Precautions –––––––––––––––––––  1
Proper Disposal –––––––––––––––––––––  2
Connecting Electricity ––––––––––––––––   3
Adapter Plugs –––––––––––––––––––––––  3

Installation / Operation Instructions

Ownership –––––––––––––––––––––––––––––––   4
Required Tools  –––––––––––––––––––––––––––  4
Uncrating  –––––––––––––––––––––––––––––––  4
Location  ––––––––––––––––––––––––––––––––– 5
Leveling Cabinet  –––––––––––––––––––––––––  5 
Conductors and Circuits ––––––––––––––––––––– 6
Electrical Instructions & Start-up –––––––––––––– 7
Sealing the Cabinet to the floor   –––––––––––––  8
Bin Divider Installation & Operation ––––––––––– 8

 

Maintenance, Care & Cleaning

Temperature Control Adjustment –––––––––––––  9
Cleaning Condenser Coil  –––––––––––––––– 10-11
Stainless Steel Equipment Care & Cleaning 

––

12-13

Warranty (U.S.A. & CANADA ONLY!) –––––––––– 14

TCM-78-AC

TCM-84

12/20/06 1.5K SB #897016

Содержание TCM-78-AC

















Отзывы: