True TC650 страница 151 Скачать руководство пользователя

Страница: 151 / 167

Truefitness.com / 800.426.6570 / 636.272.7100

151 of 171

CHAPTER 5: CARE & MAINTENANCE

LEVELING THE EQUIPMENT:

This equipment has adjustable front leveling feet to make sure that the running surface

is level. If the unit is placed on an uneven surface, adjusting the front feet can help, but may

not completely compensate for extremely uneven surfaces.

OTHER SCHEDULED PREVENTIVE MAINTENANCE:

TRUE recommends that quarterly scheduled maintenance be performed by a qualified service technician. Please contact

your dealer or visit www.truefitness.com to contact a local TRUE authorized service technician.

Scheduled Preventive Maintenance:

• Record time, distance and hours from the console.

• Check error log in console.

• Check running belt and drive belt tension and tracking.

• Remove the motor cover and vacuum any debris out of the drive motor, speed sensor cage, motor control

board and heat sink motor compartment.

• Move treadmill and vacuum underneath.

• Lubricate elevation pivot points including rear stabilizing feet and the lift motor screw.

• Lubricate walking belt and deck.

• Inspect all fasteners.

• Inspect all electrical connections.

• Inspect all components for abnormal or premature wear.

CAUTION:

Use only TRUE Fitness certified service providers.

LONG TERM STORAGE:

When the treadmill is not in use for any length of time, turn it off. Make sure that the power cord is unplugged from the

power source and is positioned so that it will not become damaged or interfere with people or other equipment.

Storing the Chest Strap:

Store the chest strap in a place where it remains free of dust and dirt such as, in a closet or drawer. Be sure to protect the

chest strap from extremes in temperature. Do not store it in a place that may be exposed to temperatures below 32° F

(0° C). To clean the chest strap, use a sponge or soft cloth dampened in mild soap and water. Dry the surface thoroughly

with a clean towel.

Содержание TC650








































































































































































Результаты поиска

Содержание TC650

Отзывы:

Похожие инструкции для TC650

Бренды по названию

Популярные бренды

True TC650, Руководство пользователя

Результаты поиска

Содержание TC650

Отзывы:

Похожие инструкции для TC650

Бренды по названию

Популярные бренды