S
TEP
1: A
SSEMBLE
THE
C
HEST
P
RESS
Insert the pre-assembled
cables as far as possible
into the upright as
shown.
Threaded
cable end.
1. Place upright frame and chest
press frame squarely on the floor.
Note orientation of upright frame.
2. Insert the pre-assembled cable
from the top of the chest press
frame into the upright as shown.
3. Insert the pre-assembled cable
from the bottom of the chest
press frame into the upright as
shown.
4. Loosely assemble ALL hardware
shown in this step.
5. After aligning all component
edges and surfaces, tighten the
hardware.
6. Install the rubber feet
Strength
MP 3.0, 3.5, & 4.0
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Tr
uefi
tness.com
Page # 19 of 64