Page # 14 of 39
Page # 15 of 39
CHAPTER 2: ASSEMBLY GUIDE
CHAPTER 2: ASSEMBLY GUIDE
Strength
Fuse XL-1700
Strength
Fuse XL-1700
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com
ASSEMBLY STEPS:
Step 1 (Main Frame Assembly):
Route the weight stack cable through the main
frame assembly. Use the pull string inside the
main frame assembly to assist with routing the
cable. After placing the machine in the intended
location, use the leveling feet to ensure the main
frame assembly is equally parallel to the ground at
any point.
Note: Secure weight stack cable ends to ensure no
tripping hazards until machine is fully assembled.
Note: Do not fully tighten main frame assembly
hardware until step 10 (Cam Cover Plates). Step
4 (Pivot Adjustment Arm Assembly) and Step 5
(Pad Frame Assembly) are excluded from this note
and are fully tightened upon completion of the
respective step.
Item
Part Number
Description
Quantity
1
FUS-17MF600XBK
MAIN FRAME
ASSEMBLY
1
2
FUS-17CBL01X
CABLE
1
PRE-ASSEMBLY CHECKLIST:
Carton Two Contents
Note: Hardware item
numbers on the tooling
card may not match the
harware item numbers
shown in the owner’s
manual.
Item
Part Number
Description
Quantity
1
FUS-17CBL01X
CABLE
1
2
TRXL2-17PA000XBK
HANDLE/ARM PAD ASSY
1
3
FUS-00TP016XBK
FUSE 16 WT TOP PLATE ASSY
1
4
TRXL2-17CV002BK
CAM COVER PLATE B
1
5
TRXL2-17CV001BK
CAM COVER PLATE A
1
6
TRXL2-17SF000XBK
PAD FRAME ASSEMBLY
1
7
FUS-17MF600XBK
MAIN FRAME ASSEMBLY
1
8
B 900
PULLEY
4
9
FUS-00WB001
FUS WT BUMPER
2
10
TRXL2-17CM000XBK
CAM ADJUSTMENT DISC
1
11
TRXL2-17PA100XBK
PIVOT ADJUSTMENT ARM ASSY
1
12
7XL2-1700HW
FUSE 1700 HARDWARE PACK
1
