TRUE
glass
door
merchandisers
-
health
safety
timer
www
.
truemfg
.
com
TEC_TM_020 REV. A
07/9/2020
Page 15 of 20
TOUCH SENSING DISPLAY INSTRUCTIONS
DISPLAY
DISPLAY LEGEND
LED
INDICATORS
BUTTONS
(*) LED Off = Locked, LED ON = Unlocked
LED will blink to notify the key detection
3. ENABLING THE PRODUCT LOADING AND SERVICING DELAY (30 MINUTES FOR
REFRIGERATOR AND 75 MINUTES FOR FREEZER)
This feature is to prevent locking when loading an empty cabinet.
1. Touch Enter twice to unlock the display.
2. Touch Enter again to display the main menu (
InF
will be the first item).
3. Touch Enter to display
hst
.
4. Touch Enter to display the value
00
.
5. Touch
+
once to change the value to
01
.
6. Finally touch Enter.
4. ADJUSTING THE SET POINT
1.
Touch Enter twice to unlock the display.
2.
Touch Enter again to display the main menu (
InF
will be the first item).
3.
Touch either
–
or
+
to navigate the menu and find the
SP
item.
4.
Touch Enter to display the set-point value
*
.
5.
Touch either
–
or
+
to increase / decrease the set point.
6.
Touch Enter to save the new value.
• After 10 seconds the display will return to its normal state showing the cabinet temperature.
*NOTE:*
The set-point value (SP) is NOT the cabinet holding temperature. To maintain proper operation within a safe temperature
range and prevent an alarm activation, it is recommended to only change the value a few degrees.
• After 10 seconds the deisplay will return to the delay state showing hSt/dLY alternating.
