TRUE
glass
door
merchandisers
-
health
safety
timer
www
.
truemfg
.
com
TEC_TM_020 REV. A
07/9/2020
Page 8 of 20
Shelf
Clip
Shelf
Shelf
Organizer
Pillaster
(I-beam)
Shelf
Standards
Retainer
Clip
T-Series
& GDM-5
Airflow
Guard
SETUP
WARNING!
Do not use pliers or any
crimping tools when installing
shelf clips. Altering shelf
clips in any way can lead to
shelving instability.
SHELF CLIP INSTALLATION:
For Proper Shelf Clip Installation Please Read The Following
Instructions.
STEP 1
Install the top tab of the shelf clip into the proper hole. Push up on
the bottom of the clip. (See image 1).
STEP 2
Bottom tab of the shelf clip will fit tightly. You may need to squeeze
or twist the bottom of the shelf clip to install. (See image 2 & 3).
STEP 3
After installation, the shelf clip will fit snug into the shelf standard.
The shelf clip should not be loose or able to wiggle out of the shelf
standard.
SHELF CLIP INSTALLATION TIPS
1. Install all the shelf clips before installing the shelves.
2. Start at the bottom in terms of shelf installation and work
your way up.
3. Always lay the back of each shelf down on the rear clips
before the front.
Installing top tab of shelf clip
1
You may need to squeeze or twist
the bottom of the shelf clip to
install
3
Installing bottom of the shelf
clip
2
Shelf clip installation complete
4
STANDARD ACCESSORIES
SHELVING INSTALLATION / OPERATION
SHELF INSTALLATION:
A. Hook shelf clips onto shelf standards.
B. Position all four shelf clips equal in distance from the floor for
flat shelves.
C. Lower front of gravity feed TrueTrac organizers to enable
proper feed.
D. Place shelves on shelf clips making sure all corners are seated
properly.
WIRE SHELVES:
Wire shelves are oriented so that cross
support bars are facing down.
NOTE:
GDM-5 models include an airflow guard on the rear of
shelves to maintain an air space at the rear of the cabinet. (see
illustration).
