DOUBLE BURNER TI-2C
INDUCTION COOKTOP MANUAL
P. 6
If the display shows an error code, please reference this sheet for a potential solution:
- -
E1
E2
E3
E4
E5
E6
E7
E8
Error Code Cause & Potential Solution
No cookware found or improper placement of cookware on
cooking zone. Ensure cookware is centered on cooking zone
and that it’s induction compatible *
See
COMPATIBLE COOKWARE
Internal circuit error, contact manufacturer
IGBT (Insulated Gate Bipolor Transistor) overheating. Turn
off the unit to allow IGBT to cool. Restart the unit once it has
cooled off
Supplied voltage to cooktop is too high. This may occur
when there is an decrease in voltage supplied to the house
circuit. Once the supplied voltage returns to normal, the
code will disappear.
Top plate sensor open/short circuit. Turn OFF the cooktop,
then shut off power at the circuit breaker for 30 secs. Turn
the power on and press POWER button to the unit. If error
message persists, call for service.
IGBT sensor open/short circuit. Turn OFF the cooktop, then
shut off power at the circuit breaker for 30 secs. Turn
the power on and press POWER button to the unit. If error
message persists, call for service.
Top plate overheating. Please turn off the cooktop to let it
cool down.
Control panel connection loosen, power sharing invalid.
Supplied voltage to cooktop is too low. This may occur
when there is an increase in voltage supplied to the house
circuit. Once the supplied voltage returns to normal, the
code will disappear.
VII. Troubleshooting Error Codes
