True Fitness XFT-100, Инструкция по сборке

Страница: 14 / 29

14
1. Verify that there are 12 weight plates installed on each stack.
2. Wipe the front surface of the weights, in the area that the label will be
installed, with isopropyl alcohol. Allow to dry completely before proceeding.
3. Shown to the right is the proper weight stack label for this machine. It contains
both LB and KG designations for each plate.
There are (3) options for installation.
A) Install just the LB labels.
B) Install just the KG labels
C) Install both the LB and KG labels.
NOTE that the designations on the label for each plate are the PULL
RESISTANCE at the handle and NOT the weight of the individual weight plates.
See the MACHINE SPECIFICATIONS section earlier in this manual for a brief
discussion on this.
4. The backing that covers the adhesive is cut in a series of vertical strips. If you
just want to install the LB stickers, only remove the backing strip directly
behind the area of the LB stickers. Likewise, if you intend to install the KG stickers, remove the
backing directly under the KG stickers. DO NOT REMOVE the backing from the area behind the
center section with the holes.
5. Carefully align the top hole in the label with the
hole in the top weight plate, then align the
bottom hole in the label with the hole in the
bottom weight plate.
6. Once the label is aligned, lightly press the
individual stickers into place. DO NOT rub the
area surrounding the individual labels.
7. Carefully press each sticker with your finger as
you peel away the surrounding material.
8. Once you are left with the individual stickers on
each plate, press and rub the sticker firmly to
the face of the plate.
9. Allow the adhesive to cure for 48 hours. DO NOT
attempt to “test” the integrity of the labels after
they have been installed.
10. The part number for the label sheet is LBL-
WSEM-01065.
S
TEP
5: A
TTACH THE
W
EIGHT
S
TACK
L
ABELS
Attach KG stickers, LB stickers, or both.
LBL-WSEM-01065
PART NUMBER: