True Fitness SD1000 страница 44 Скачать руководство пользователя

Страница: 44 / 51

CHAPTER 4: CARE & MAINTENANCE

Truefitness.com / 800.426.6570 / 636.272.7100

CABLE INSPECTION & MAINTENANCE (continued):

Cable Tension:

Ensure that the cables are adjusted to remove any slack using the threaded end fittings. These are normally located at the

weight stack connection. Depending upon the machine, there may be multiple threaded fittings on multiple cables. You

can determine if there is too much slack by performing the exercise. As you start to move a load arm or handle, the weight

stack should lift immediately. If not, the cable tension needs to be adjusted.

To adjust the cable tension, loosen the cable nut

that is located on the Cable Bolt connected to the

Top Plate. Tighten the cable bolt until the top

plate is barely lifted off of the first weight plate and

then re-tighten the cable nut.

CAUTION

A minimum of 1/2 inch (12.7mm) of the threaded

portion of the cable bolt must be threaded into the

top plate.

*No more than 1inch (25.4mm) of the threaded

portion of the cable bolt should be visible.

Handle Fittings (if applicable):

Inspect the cable fittings where any handles are

attached to the end of the cable. The fittings supplied

with this machine are load rated snap-links. Ensure

that the snap-link opens and closes easily and is fully

engaged when closed. Replace the snap-link as

needed.

Cable Bolt

Cable Nut

Top Plate

1/2” (12.7mm)

Minimum

1” (25.4mm)

Maximum

Содержание SD1000




















































Результаты поиска

Содержание SD1000

Отзывы:

Похожие инструкции для SD1000

Бренды по названию

Популярные бренды

True Fitness SD1000, Руководство пользователя

Результаты поиска

Содержание SD1000

Отзывы:

Похожие инструкции для SD1000

Бренды по названию

Популярные бренды