True Fitness Atlas 200 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 53

background image

True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Truefitness.com

Page # 47 of 53

CHAPTER 3: CARE & MAINTENANCE

Strength

Atlas 200/201

Truefitness.com / 800.426.6570 / 636.272.7100

39

CHAPTER 4: CARE & MAINTENANCE

CAUTION:

If you determine that the equipment needs service, make sure that the equipment cannot be used inadvertently and ensure

other users know that the machine needs service.

*To order parts or to contact a TRUE Authorized Service representative, please visit www.truefitness.com

CABLE INSPECTION & MAINTENANCE:

One of the most critical areas that require frequent inspection on any weight machine is the cable or belt system that lifts

the weight stack

if the machine is equipped

with those items

. Sudden failure of a worn cable can

,

in some instances, result

in injury to the user. It is the responsibility of the facility to inspect the cables frequently.

Cables are components that wear over time. This means that the more often a piece of equipment is used, the greater the

likelihood that cable wear will occur. This holds true for equipment made by any manufacturer and applies to urethane

belts as well as wire rope cables. Listed below are the areas of the cable that require inspection.

*TRUE Fitness recommends that all cables be replaced on an annual basis to maintain the safety of all users.

Cable Wear:

Inspect all cables for any signs of wear. Pay close attention to the cable in the area of the end fittings and attachment
points. Inspect the areas around the pulleys and/or cams. Shown below are examples of cables that exhibit signs of
potential failure. If any of these conditions are apparent, the machine should immediately be taken out of service and
repaired. Be sure to use only cables supplied by TRUE Fitness. DO NOT use cables that have fittings attached with hand-
crimp tools.

Twisted Cable (Zig-Zag pattern):

Break in the Cable Cover:

Break/Bend in Cable:

Tear in the Cable Cover:

Stretched Cable Covering:

Crimp Connector Dislodged:

Bad

Good

CABLE INSPECTION & MAINTENANCE:

«
...
45
46
47
48
49
...
»

Содержание Atlas 200






















































Отзывы:

Нет отзывов

Похожие инструкции для Atlas 200

Бренд: Parker Страницы: 54

Бренд: GE Страницы: 24

Бренд: Landoll Страницы: 83

Movie FL Black E27 Flaps

Бренд: Qazqa Страницы: 2

Бренд: 3M Страницы: 48

Бренд: 3M Страницы: 19

Speedglas G5-01

Бренд: 3M Страницы: 62

Quickfit Nexus Exit

Бренд: Thomas & Betts Страницы: 2

Бренд: Hagie Страницы: 141

Бренд: K-LASER Страницы: 70

Бренд: K-LASER Страницы: 72

NI VISION PCI-8254R

Бренд: National Instruments Страницы: 13

NI VISION PCI-8254R

Бренд: National Instruments Страницы: 16

Бренд: National Instruments Страницы: 10

Бренд: National Instruments Страницы: 39

Бренд: National Instruments Страницы: 65

Бренд: haacon Страницы: 59

Бренд: Vatech Страницы: 137

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды