True Fitness 500R, Руководство по обслуживанию

Страница: 17 / 100

Symptom Probable Cause Corrective Action Recommended Tools
NO CONTACT
HEART RATE
750U, 750R
Dirty Sensors
Console Set/
Wiring
Wire Connections
•
Verify hand pulse sensors are clean.
--------
•
Set meter for continuity.
•
Remove Console set.
•
Check for continuity in both sets of
hand pulse sensors between the console
set and hand pulse sensor plates.
•
If continuity is OK – Replace Console
set. If no- continue on.
--------
•
Check wire connections @ handlebar
console mast joint
•
Check connections of wires to hand
pulse sensor by removing hand pulse
sensor plates.
•
To remove hand pulse sensor plates
carefully pry under one end to free them
from the plastic handgrips.
•
Bad connections? - Reconnect/ Replace
bad wires.
•
Recheck continuity.
Note:
You must pedal at least
30 RPM when
performing any voltage
test. You may require the
assistance of another
person when performing
voltage checks.
Multi-meter
Double sided tape
Support Services 800-883-8783 Mon-Fri 8:30am-5:00pm Central Time Zone Fax: 636-272-7148
Page 15