Rev G, June 6, 2019
7
Manual Number 9017899
SECTION 2 PRE-INSTALLATION CONSIDERATIONS
2.1
COOLING
No external cooling is required. The unit will become warm when in use. This is normal and within
operational parameters. No special mounting considerations are required; however, mounting to a metal
surface can help dissipate any heat generated and extend the life of the product.
2.2
EQUIPMENT LOCATION
The TA202 High Power USB Charging Port is designed for mounting flexibility, allowing for installation in
the cockpit or in the cabin. It is designed for panel mounting and can be installed in a rectangular
configuration or, with an available installation kit, can be front mounted with a cosmetic cover plate. An
instrument mounting adapter bracket is also available to easily mount the unit in a standard 2-inch round
instrument opening that may already exist in the cockpit panel. There are two versions to choose from
which allow the input connector to be located either on the rear of the unit or from the bottom.
The unit can be mounted in any orientation. Clearance should be provided for the mating connector which
may require an additional inch beyond the rear of the unit.
2.3
ROUTING OF CABLES
Avoid sharp bends in cabling and routing near aircraft control cables. Avoid close proximity and contact
with aircraft structures, avionics equipment or other obstructions that could chafe wires during flight and
cause undesirable effects.
2.4
LIMITATIONS
Environmental qualifications were verified per RTCA DO-160, Revision G in lieu of those identified within
the minimum performance standards (MPS) of the TSO.
The conditions and tests for TSO approval of this article are minimum performance standards. Those
installing this article, on or in a specific type or class of aircraft, must determine that the aircraft installation
conditions are within the TSO standards, specification of the article and deviations as listed above. TSO
articles must have separate approval for installation in an aircraft. The article may be installed only
according to 14 CFR part 43 or the applicable airworthiness requirements.
The USB Type-C interface is an exciting new connector for electronic devices. Beyond the physical
format of the Type-C connector, it also allows for a variety of interface options when communicating with
compatible devices. This device-to-charger communication is defined within the USB 3.1 Specification
and Power Delivery 2.0 standards. However, manufacturers of consumer electronic devices and/or cables
may choose to implement proprietary versions or modifications of the USB standards to operate
specifically with their own charging equipment. The TA202 has been tested with and supports a wide
variety of devices now emerging on the open market. However, compatibility with all devices may not be
guaranteed. True Blue Power continues to be proactive in evaluating new devices and strives to
continually improve the product as needed to serve the vast majority of USB Type-C electronic products.