INSTRUCTIONS FOR USE: STEAMING YOUR GARMENTS
The steamer should be used only in an upright position, slowly moving the steamer up and down in a
vertical motion.
Refrain from using the steamer in or on garments in a horizontal or tilted position or left to right.
Refrain from making any quick motions while steamer is on, quick motions could result in hot water
spitting.
Hold steamer by its handle when using. Do not grasp body of unit while steaming garments or while
unit is hot.
Hang garment against a heat and steam proof surface.
Hold the fabric taut, and direct the flow of steam toward the garment to remove wrinkles, in an up and
down motion.
Fabric brush can be attached to the nozzle with slight force. Fabric brush will click in to position.
Connect the power cord to compatible electrical outlet and press the power switch.
Once the power light is on, steamer will start to heat up. Allow 90 seconds for steam to come out.
To remove the fabric brush, turn off steamer and wait for steamer to cool down completely.
CARE & CLEANING
Always empty the water tank after each use.
To clean the outside of the steamer, gently wipe down with a damp cloth.
Distilled or filtered water is recommended.
Do not fill the water tank with cleaning agents.
Always ensure the steam outlet vents are clean and free from buildup and debris.
If buildup occurs and steaming becomes intermittent, add a descaling solution of 1/2 distilled water and
1/2 distilled vinegar to the water tank and turn on the steamer until solution is used.
CARE & CLEANING
TROUBLESHOOTING GUIDE
The steamer does not heat up
The steamer does not produce steam
Water spills from the water tank
Check the main power source and electrical circuit
Make sure there is enough water in the tank.
Make sure power switch is ON
Hold the steamer in an upright position
Make sure water is not over the MAX level.
If there is visible buildup in the water tank,
decalcify as instructed
For more troubleshooting & steaming tips visit www.trueandtidy.com
