TruAudio T100, Руководство пользователя

Страница: 4 / 8

6. Connect the IR receiver to the “IR IN” and place the IR receiver somewhere in front of the TV where
it will be visible to the remote
NOTE: If using a Toslink from the TV to the amp T100 and you don’t hear audio, or the audio is garbled then set
the audio coming from the TV or cable box to PCM stereo.
Connecting the T100 to an Audio Source with Subwoofer
1. Connect your audio source to the T100 using an RCA cable or Toslink
2. Set dip switch 5 to IN1 or IN2 to set the default input
3. Set dip switch 1 to (variable) for volume to be controlled by the T100 remote, or, set dip switch 1 to
(fixed) for volume to be controlled by the audio source.
4. Connect an RCA cable from the powered subwoofer to the T100 SUB OUT. Set the subwoofer
crossover and volume on the subwoofer.
5. Now connect the speaker wires to the amplifier speaker output.
NOTE: To switch between audio sources, press the IN1 or IN2 button on the supplied remote.
L
R
OUT IN
Optional second
audio source
Linking Multiple T100
When linking multiple T100’s together the first T100 will be the control unit. Set the first amp to “variable”and
additional amplifiers must be set to “fixed”. The first T100 will control the volume of all additional amplifiers.
3
3.5mm to L/R RCA cable
IR Receiver
To additional amplifiers