17
SC1100 Operations
-
Settings
Setting Welding Controls
-
Time and Current
The time and current controls are located on the front of the welder. The controls consist of a
Time Button, Current Button, Adjustment Dial, and a Fine/Coarse Switch. The digital display will
indicate the settings chosen during setup.
When setting time or current, depress and hold down appropriate button, and turn Adjustment
Dial clockwise or counter
-
clockwise to the correct setting on the digital display.
Use the Fine/Coarse Switch for setting the appropriate time or current
-
this will toggle between
10’s or 100’s of amps and 10th’s and 100th’s of a second.
To adjust gas purge time, hold both the TIME and AMPS buttons and turn Adjustment Dial. The
setting is saved when the buttons are released.
