3 of 28
ISSUED: 09-11-09 SHEET #: 202-9376-8 01-27-11
Installing to Wall
Wood Stud Wall
Use wall plate (
N
) as a template, make sure it is
level, and mark four mounting holes along the
center lines of the wood studs. Drill four
3/16" (5 mm) dia. holes 3-1/4" (83 mm) deep.
Level wall plate (
N
) and attach to wall with four
long bolts (
J
) and four washers (
L
). Tighten
screws fi rmly. Do not overtighten.
1
Concrete Wall
Level wall plate (
N
) and use as a template to
mark six mounting holes. Drill six 3/8" (10 mm)
dia. holes to a minimum depth of 3-1/4" (83 mm).
Insert six anchors (
K
) into holes and secure
wall plate (
N
) to wall with six long bolts (
J
) and
six washers (
L
). Tighten screws fi rmly. Do not
overtighten.
TOP CUTAWAY VIEW
Long bolts in
center of stud.
STUD
J
L
N
WARNING
Do not over tighten screws, or
damage may occur.
WARNING
SOLID CONCRETE
Drill holes and insert anchors (
K
).
concrete
surface
1
K
Place plate (
N
) over anchors (
K
). Secure with long bolts (
J
)
and washers (
L
).
N
K
J
2
L
CUT
A
W
A
Y
VIEW
INCORRECT
concrete
CORRECT
WARNING
wall plate
plaster/
dry wall
wall plate
plaster/
dry wall
concrete
J
L
N
K
J
L
N
