Tru-Turf RS48-11D, Руководство пользователя

Страница: 15 / 48

TRU-TURF RS48-11D USA Roll ‘n’ Spike & RS48-11DB Golf Greens Roller Manual 12
Maintenance
• Stop engine before performing any maintenance.
• Service the Honda engine according to the
manufacturers maintenance schedule.
Transmission (pump, Eaton 11)
• Initially, change the oil at 50 hours running time, then;
• Change oil every 500 hours or annually, whichever
occurs fi rst.
• Change hydraulic oil fi lter every 500 hours or annually,
whichever occurs fi rst.
• Only use the manufacturer’s recommended
replacement oil fi lter .
• When fi tting the fi lter, follow the instructions supplied
with the fi lter. This will ensure that the fi lter remains
tight and that no leaks occur.
• Check all hard line oil pipes for rubbing, excessive
vibration, leaks and tightness on a regular basis.
• Check transmission oil level on oil tank sight glass. Oil
level should remain at a minimum of 25mm (1”) and at
a maximum of 40mm (1.5”) from the top of the tank.
• Oil Capacity including fi lter is 6 liters or 5.3 U.S. quarts.
For the ultimate performance we use and recommend
the Penrite synthetic 5 SAE 5W-60 transmission oil.
(Part No. R5226)
Storing
• It is important to store this roller in the towing
position. This ensures the trailer strut is in the
closed position, protecting the shaft from
corrosion, then failure and also the weight is
taken off the roller bearings.
Service of the drive chain system
• Replacement - Some chains look a like, but
they are not, use only the chain and sprockets
recommended as per the correct spare parts
number. Wrong pitch drive chain fi tted will
cause excessive sprocket wear and possible
drive failure.
• Tensioning the drive chain - No adjustment
is required; the chain tension is automatically
adjusted.
Lubrication
• Lubricate drive chain with a chain lube such as
Molykote, Innox or ChunkaRocol ITW. Spray
on the inside of the chain so that the lubricant
is forced into each roller and around each pin
prior to rolling of the Greens..
Service of smoothing roller bearings
• Whilst the Roller is suspended by the Trailer,
check operational smoothness of the bearings
fi tted to each smoothing roller by rotating
the rollers by hand. If bearing tightness,
roughness or excessive looseness is detected,
replace the faulty bearings.
Maintenance