1
rollers
RS48-11C ROLL ‘n’ SPIKE GOLF GREENS ROLLER - Operation, Maintenance & Parts Manual
MAINTENANCE
•
Stop engine before performing any maintenance
•
Service the Honda or Kohler engine according to the manufacturers maintenance schedule.
TRANSMISSION (PUMP, EATON 11)
•
Initially, change the oil at 50 hours running time, then;
•
Change oil every 500 hours or annually, whichever occurs first
•
Change hydraulic oil filter every 500 hours or annually, whichever occurs first.
•
Only use the manufacturer’s recommended replacement oil filter
•
When fitting the filter, follow the instructions supplied with the filter. This will ensure that the filter
remains tight and that no leaks occur
•
Check all hard line oil pipes for rubbing, excessive vibration, leaks and tightness on a regular
basis
•
Check transmission oil level on oil tank sight glass. Oil level should remain at a minimum of 25mm
(1”) and at a maximum of 40mm (1.5”) from the top of the tank
•
Oil Capacity including filter is 6 liters or 5.3 U.S. quarts
•
As a guide to correct transmission oil, see page 1 of this manual.
STORING
•
It is important to store this roller in the towing position. This ensures the trailer strut is in the
closed position, protecting the shaft from corrosion, then failure & that the weight is taken off the
roller bearings.
SERVICE OF THE DRIVE CHAIN SYSTEM
•
Replacement
- Use only the chain and sprockets recommended as per the correct spare parts
number. Wrong pitch drive chain fitted will cause excessive sprocket wear & possible drive failure.
•
Tensioning the drive chain
- No adjustment is required; the chain tension is automatically
MAINTENANCE
