Tru-Turf R50-11, Руководство пользователя

Страница: 23 / 70

21 www.turturf.com R50-11 Owners Manual
Maintenance
Lubrication
• Lubricate drive chain with a chain lube such as
Molykote, Innox or ChunkaRocol ITW. Spray on the
inside of the chain so that the lubricant is forced
into each roller and around each pin prior to rolling
of the Greens. Do not over lubricate.
Service of smoothing roller bearings
• Whilst the Roller is suspended by the Trailer, check
operational smoothness of the bearings fitted to
each smoothing roller by rotating the rollers by
hand. If bearing tightness, roughness or excessive
looseness is detected, replace the faulty bearings.
• If bearings are faulty
(a) Remove the complete smoothing head
unit assembly from the machine, undo the
four swivel mount bolts on the upper body
and disconnect the steering rod, wheel the
roller away until the total head assembly is
exposed to work on.
(b) Remove roller shaft bolts from end plates,
remove rollers from the heads.
(c) Fit new bearings, replace rollers into the
heads, lubricate shaft bolts with an anti seize
compound before installing them. Tighten
securely and ensure rollers rotate freely
when fully tightened.
(d) If the connecting rods are removed or
lengths altered ensure they are correctly
adjusted so that the three heads are parallel
to each other when in the straight ahead
position. Adjust if necessary.