Tru-Test EziWeigh6, Быстрый старт

Страница: 1 / 28

816757 issue 5, 4/2015
© Tru-Test Limited, 2011-2015 All rights reserved.
This quickstart guide provides basic instructions for installing and using your EziWeigh6 weigh scale indicator (the indicator). For more detailed instructions,
see the USB flash drive/CD included with the indicator, or see www.tru-test.com.
Before you start
Charging the internal battery
Note:
Before using the indicator, ensure that the internal battery is fully charged.
Note:
The battery indicator may not be entirely accurate when the indicator is being used in very cold conditions (below 5 ºC / 40 ºF).
FCC and ICES-003 Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.