Avoid the following unfavourable ambient conditions at the installation location and during
transport:
– Damp or excess air humidity
– Extreme hot and cold temperatures
–
Dust or flammable gases, vapours or solvents
– Strong vibrations.
If you have any questions that are not answered in these operating instructions, please
contact our technical department or a third-party specialist.
6 Installation
If you do not have the expertise to install the device correctly, please arrange
for the installation to be carried out by an expert or a specialist workshop!
If you have your own network or system administrator for your network (as will pro-
bably be the case in a larger company), please let this person assume the responsi
-
bility for connection and wiring. Do NOT connect the switch yourself!
Please note the following illustrations for
installing the device on a DIN rail:
1. Carefully suspend the switch (terminal
strip at the top) from above into the DIN
rail.
2. DIN rail
3. Move the switch downwards with a little
force and push it onto the DIN rail until
it clicks into place. Check that the switch
is firmly seated before you start wiring.
1.
Earthing screw
2. 4. Terminal strip (power supply 1 and 2)
3.
DIN rail mount
5.
POWER LED
6.
Link/Act LED
(yellow, network activity indicator)
7.
Ethernet port (RJ45)
On the top of the switch there is an industrial
terminal with 6 connections for the redun-
dant power supply. The PGND terminals
have no function.
The terminals have the following mean-
ings:
P1 (Power supply 1)
P+1 = 12 - 52 V/DC
P-1 = GND
PGND
These PGND terminals have no function.
P2 (Power supply 2)
P+2 = 12 - 52 V/DC
P-2 = GND
Earthing contact
Two separate power supplies for redundant operation can be connected via terminals P1
and P2. The voltage range is between 12 - 52 V/DC. Ensure the correct polarity when
connecting!
If redundancy is not required, the supply can also be connected via only one of the
two power supply terminals P1 or P2.
The equipotential bonding between the switch cabinet and the switch is established via the
earthing screw. Attach the earthing cable to the earthing screw on the switch and ensure
that the earthing system is properly connected. The switch is equipped with a lightning
protection mechanism. You can also ground the switch with an earthing cable via the PE
(protective earth).
Always switch the power supply OFF before connecting the power cables.
Exceeding the input voltage may damage the device and cause it to malfunction.
Operating instructions
INDUSTRIAL ECO SWITCH 5-PORT 10/100
Item No. 2436041
INDUSTRIAL ECO SWITCH 5-PORT 10/100/1000
Item No. 2436042
1 Intended use
This product is intended for cable-based networking of computers or other suitable devices in
industrial settings. It provides 5 twisted-pair connections (RJ45). The product can be mounted
on a DIN rail. The switch is designed for harsh industrial environments. With a temperature
range of -40 °C to 75 °C, the switch can be used in the harshest of conditions. Always observe
the safety instructions and all other information included in these operating instructions.
Using this product for any purpose other than that described above may damage the product
and result in a short circuit, fire, electric shock or other hazard. The product must not be mod
-
ified or reassembled!
This product complies with statutory national and European regulations. All company and prod-
uct names contained herein are trademarks of their respective owners. All rights reserved.
2 Delivery content
Network switch
Mount for DIN rail
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code
shown. Follow the instructions on the website.
4 Symbols in this document
This symbol warns of hazards that can lead to personal injury. Read the information
carefully.
The arrow symbol indicates special information and advice on operation.
5 Safety information
Damage caused due to failure to observe these instructions will void the war-
ranty. We shall not be liable for any consequential damage!
We shall not be liable for damage to property or personal injury caused by
incorrect handling or failure to observe the safety information! Such cases
will void the warranty.
The unauthorised conversion and/or modification of the product is prohibited for safety and
approval reasons (CE).
The product is not a toy and must be kept out of the reach of children!
Do not leave packaging material lying around carelessly, as it could become a dangerous
plaything for children.
Ensure that the equipment room is well ventilated to avoid heat damage.
Do not install the switch near water or in a damp environment. Make sure that no water or
moisture can enter the switch.
The product is only intended for use in dry indoor locations. The entire product must not
become wet or damp.
Do not place the switch on an unstable surface or table. The switch may be severely dam-
aged in the event of a fall.
Never use the product immediately after it has been taken from a cold room into a warm
one. This may cause condensation to form, which can destroy the product.
Allow the product to reach room temperature before connecting it and putting it into
use. This may take several hours.
Servicing or repair work may only be carried out by a specialist workshop.
Check the product for damage before use!
If you notice any damage, the product must NOT be used.
Safe operation can no longer be assumed if:
–
there is visible damage to the product,
–
the product does not function or does not function properly (e.g. a burning smell),
– the product was stored under unfavourable conditions
When installing the product, make sure the cables are not bent or jammed or under me
-
chanical stress.
