User Manual
VCK-70v-100AIW
70v Volume Control
With the overwhelming demand for TruAudio 70V speaker
systems and the many applications our dealers are using them
with, we are proud to offer the VCK-70V-100AIW 70V volume
control. The VCK-70V-100AIW are designed to handle a 70V
signal of up to 100 Watts of amplifier power.
NOTE: When attaching the decora plate to the volume control, first remove the metal plate from behind the plate and screw it to the
front of the volume control using the included nut.
Description
1- VCK-70V-100AIW
1- White, 1 – Ivory and 1 – Almond face plate kits
Each face plate kit includes color matching decora plate, knob, (2) two painted screws
and (1) one decora insert plate with nut
Contents
Installation
70v AMPLIFIER
VCK-70v-100AIW
70v SPEAKER
1) Make sure the amplifier is turned off.
2) Strip back the insulation ¼” on both of the wires from the amplifier and the speaker (s)
3) Insert the 2 wires from the amplifier making sure the + and – (polarity) are correct into the “in”
on the back of the volume control.
4) Insert the 2 wires from the speaker making sure the + and – (polarity) are correct into the “out”
on the back of the volume control.
5) Be careful not to over tighten the screws
6) Finally make sure there are NO lose wires or strands touching any other wires and install the
volume control into the ring or box.
NOTE: The TruAudio VCK-70V-100AIW has been designed to fit most electrical mounting boxes.
Please set the speaker to the proper 70V tap setting for your application, usually set to the max
setting.
+
+
+
+
OUT
IN
+
+
- -
+
-
