ON / STANDBY
SOURCE
CONTROLS
RELEASE
EQ MODES
SLIM -
PWR 44
REAR PANEL
www.TruAudio.com
888.858.1555
198 North Old Highway 91 Hurricane, UT 84737
Power Switch:
This switch switches the main power to the soundbar on and off. If this switch is set to OFF, there
will be no power to the soundbar.
Wireless Sub:
This button toggles the internal wireless transmitter on or off. By default the transmitter is set to on.
IR Input:
The IR port will accept either a mono or stereo IR cable input without damaging the device.
On/Standby:
Turns the soundbar on and off.
Source:
Changes the source of the soundbar. The Source LEDs will indicate which source is selected.
/-:
These buttons adjust the volume of the soundbar up and down. The Volume LED will flash green to
indicate the command is accepted. When max volume is achieved the Volume LED will no longer flash and will
instead stay solid green. When min volume is achieved the Volume LED will stay solid red to indicate no volume.
Mute:
Mutes the sound output of the soundbar. The Volume LED will turn red to indicate the soundbar is in mute.
EQ Movie, Music, Voice:
These buttons turn the built in EQ modes on or off. Each button will toggle the EQ mode
for the source selected. The Source LED will flash once for on and twice for off when a command is received. When
an EQ setting is off, the soundbar is in the default EQ setting.
REMOTE CONTROL
Power Switch
Wireless Sub
Figure - Diagram of the rear pannel
Manual
SLIM-
PWR44