TRS One 250 2016, Руководство пользователя

Страница: 26 / 38

26
REED VALVE REAR BRAKE PEDAL SWING ARM
The inlet is through a reed valve and its condition
has a significant influence on the performance of
the engine. Whenever the carburettor is removed
for cleaning, make sure the reed valves are not
worn or broken and if so, replace the valve with a
new one. The screw for adjusting the brake pedal height in
relation to the footrest is at the front of the lever.
At the rear there is a rod and lock nut that allow
you to adjust the rear brake. It is very important that
when it has been tightened there is 2mm clearance
gap at the front to ensure smooth operation.
For correct maintenance of the rear suspension
system and swing arm, it needs to be regularly dis-
mantled for cleaning, checking and lubricating the
internal bearings, plus adjusting and lubricating of
the chain. Make sure that all the parts are in perfect
condition and replace any worn components as re-
quired.
c) Tensioning rod rear brake pedal; (d) Screw for height adjust-
ment of the brake pedal. For correct performance, you need to
leave a small clearance gap.
b) Important ! The swing arm and the rear suspension need to
be regularly maintained.
a
a) Reed valve, located between the carburettor and the engine.
b
c
d
2mm
31 - Reed valve 32 - Swing arm 33 - Rear brake pedal
/ /