TRS One 250 2016, Руководство пользователя

Страница: 16 / 38

16
BRAKE PADS LEVEL OF REAR BRAKE FLUID LEVEL OF FRONT BRAKE FLUID
11 - Braking system
To ensure optimal braking you need to check the
condition of the brake pads. Initially the pad indi-
cator groove is normally around 3mm. If after use
you find this has been reduced to below 2mm, they
need to be replaced.
To replace them you need to remove the brake ca-
lliper from the fork tube, taking out the bolts and
the wire clip that you can remove from underneath.
For reassembly you will need to lever the pistons
back with a screwdriver. Then make sure the bolts
and the wire pin clip are tight.
To check the rear brake fluid level, you can view
it through the triangle of the frame on the left side
of the motorcycle. The level needs to be kept be-
tween the minimum and the maximum.
You can access the oil reservoir by removing the pe-
trol tank and loosening the cap on the tank. Brake
fluid is highly corrosive so avoid spillage.
At the rear of the front brake pump you can check
the fluid level, and replenish it to the correct level
with brake fluid NILS DOT-4.
c) Level of fluid in the front brake pump.
b) Rear brake reservoir
a) Brake pads
a
b
Max
Min
c