TROY Group C7200n Скачать руководство пользователя | Manualshive

Страница: 11 / 60

background image

Connecting to a Printer

Follow these steps to connect the EtherWind wireless print server to your printer:

1. Attach the EtherWind to the desktop mounting base.
2. Make sure the printer is off.
3. Connect the parallel cable to the print server and the printer.
4. Plug the power cord from the power supply into a wall outlet or power strip.
5. Connect the the power supply to the EtherWind.
6. Turn the printer on.

Verifying Successful Installation

When the print server is powered on, the EtherWind will go through the follow-
ing startup sequence:

◗

It runs through a set of power-up diagnostics for a few seconds. If the

EtherWind is operating properly, the yellow and green LEDs will blink
momentarily and then go out. If the green light blinks continuously in a regu-
lar patter, there is a problem. Try unplugging the power and then plugging it
in again. If the problem persists, contact TROY.

◗

When a successful connection is made to the EtherWind from another

802.11b wireless device like an access point or PC, the yellow light will stay lit.
The green light will blink whenever there is wireless networking activity.

Verifying the Connection to the Printer

Before attempting to print, it is very important to verify the connection between
the EtherWind and the printer. If this connection is not good, you will not be
able to print!

To verify this connection, make sure that both the EtherWind and the printer are
powered on and ready. Make sure that the cable is connected securely from the
EtherWind to the printer. Then print a test page by pushing the test switch and
letting go immediately.

If the test page does not print, first make sure all the connections are secure, and
make sure the printer is operating correctly and is not out of ink, toner, paper, etc.
Then power the EtherWind off and then on again, and try printing the self-test
page again.

If you cannot print a test page, refer to the Troubleshooting section of this manual.

1-3

«
...
9
10
11
12
13
...
»

Содержание C7200n





























































Отзывы:

Нет отзывов

Похожие инструкции для C7200n

Бренд: LabelTac Страницы: 2

Бренд: Ier Страницы: 8

Express 5800 Series

Бренд: NEC Страницы: 90

PDS-220F Series

Бренд: ICP DAS USA Страницы: 94

Бренд: Xerox Страницы: 8

Link Manager 4010-43

Бренд: Point Six Страницы: 131

eServer 130 xSeries

Бренд: IBM Страницы: 156

Бренд: Star Страницы: 24

DIGITAL Server 9100 Series

Бренд: Digital Equipment Страницы: 68

B-470-QQ Series

Бренд: TEC Страницы: 32

Бренд: Oki Страницы: 8

Бренд: IBM Страницы: 491

BladeCenter HS20 Type 8843

Бренд: IBM Страницы: 112

Бренд: ASROCK Rack Страницы: 51

MAC TECHNICAL REFERANCE C7350

Бренд: Oki Страницы: 95

Бренд: HIKVISION Страницы: 31

System x3550 M3

Бренд: IBM Страницы: 160

System x3650 M4 Type 7915

Бренд: IBM Страницы: 192

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды