Top view
Position for
right diagram.
ELEVATOR
Side View
25mm
25mm
30mm
30mm
Top view
RUDDER
Side View
15mm
15mm
AILERON
AILERON
Side view
Adjustment.
Epoxy the wooden block to the fuselage
under the top hatch.
Adjustment.
Adjustment.
Epoxy the wooden block to relevant position
in the fuselage.
Assemble the top hatch to the fuselage.
62
59
60
61
58
63
12
1mm
Aileron
Tailing
edge
Make sure they are in
the right position while
installing.
Make sure hinges are
mounted in the same line.
8
Pin hinge(24x24mm)
8
8
2
2
2
4
2
4
2
2
Clevis
Rod (2x300mm)
Retainer
TP Screw (2.3x12mm)
Wooden Block
(20x20x8mm)
Servo tray(68.5x56.5x2mm)
Pin hinge(24x24mm)
Screw (3x35mm)
Washer(3x15mm)
2
Washer(3x15mm)
Lock Nut (3mm )
Clevis
Retainer
Rod (2x300mm)
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Install the servo as the illustration below
Install the nylon control horn and connect the linkage.
Apply instant type CA glue to aileron and pin hinges.
Keep some space about 1mm width between
aileron and trailing edge.
Assemble the aileron to main wing with instant type CA glue. Be careful
to ensure the moving parts of the hinges are able to move freely.
1
2
3
4
5
1
Accessory list for the coming installation steps.
