background image

2

TABLE OF CONTENTS

Content

Page

Important Safe Operation Practices

3

Slope Gauge ........................................................................................................... 6

Assembling Your

 

Lawn Mower ................................................................................ 7

Know Your Lawn Mower.......................................................................................... 8

Operating Your Lawn Mower................................................................................... 9

Making Adjustments ................................................................................................ 10

Maintaining Your Lawn Mower ................................................................................ 10

Off-Season Storage................................................................................................. 12

Troubleshooting ...................................................................................................... 12

Parts List ................................................................................................................. 14

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new Lawn Mower. It will help you assemble, prepare and 
maintain the unit for best performance. Please read and understand what it says. 

Before you start assembling your new equipment

, please locate the model plate on the 

equipment and copy the information from it in the space provided below. The information on the 
model plate is very important if you need help from our Customer Support Department or an 
authorized dealer. 

You can locate the model number by standing behind the unit in the operating position and looking down at 
the cutting deck. A sample model plate is explained below. For future reference, please copy the model 
number and the serial number of the equipment in the space below.

ENGINE INFORMATION

The engine manufacturer is responsible for all engine-related issues with regards to performance, power-rating, 
specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual packed 
separately with your unit for more information.

CALLING CUSTOMER SUPPORT

If you have difficulty assembling this product or have any questions regarding the controls, operation or 
maintenance of this unit, please call the Customer Support Department. 

Call 

1(866) 840-6483 

or

 1(330) 558-7220

 to reach a Customer Support representative. Please have 

your unit’s model number and serial number ready when you call. See previous section to locate this 
information. You will be asked to enter the serial number in order to process your call.

www.troybilt.com

TROY-BILT  LLC
P. O. BOX    3 6 1 1 3 1
CLEVELAND, OH 44136

866-840-6483

330-558-7220

Copy the model number here:

Copy the serial number here:

(Model Number)

(Serial Number)

For more details about your unit, visit our website at www.troybilt.com

 

Содержание TRU CUT 100

















Отзывы: