![Troy-Bilt TB70FH Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/troy-bilt/tb70fh/tb70fh_operators-manual_1173588005.webp)
5
INSTALLING THE CUTTING ATTACHMENT SHIELD
Use the following instructions if the cutting attachment shield
on your unit is not installed or if you ever need to re-install it.
1.
Slide the cutting attachment shield into the shield mount
on the cutting attachment. Align the screw holes in the
shield with the holes in the cutting attachment (Fig. 3).
Fig. 3
Fig. 5
Fig. 4
Cutting Attachment
Shield
Screws
Hex
Lock Nut
Cutting Attachment
Shield
Cutting Attachment
2.
Place a hex lock nut into one of the three recessed holes on
the top of the cutting attachment shield (Fig 4).
3.
Install a screw into the hole from the bottom of the cutting
attachment shield and screw it into the nut installed in step
2 (Fig 5). Do not tighten.
4.
Repeat steps 2 and 3 until all three screws have been
started, then tighten securely.
Recessed Holes
Shield Mount
WARNING:
Never operate the trimmer without
the cutting attachment shield in place to prevent
serious personal injury.
Shaft Housing
ASSEMBLY INSTRUCTIONS