Troy-Bilt TB525ET, Руководство оператора

Страница: 3 / 72

3
RULES FOR SAFE OPERATION
both trimming lines extended, and the proper line installed. Do
not extend the trimming line beyond the length of the shield.
• This unit has a clutch. The cutting attachment remains
stationary when the engine is idling. If it does not, have the
unit adjusted by an authorized service technician.
• Adjust the handle to your size in order to provide the best grip.
• Be sure the cutting attachment is not in contact with
anything before starting the unit.
• Use the unit only in daylight or good artificial light.
• Avoid accidental starting. Be in the starting position whenever
pulling the starter rope. The operator and unit must be in a stable
position while starting. Refer to Starting/Stopping Instructions.
• Use the right tool. Only use this tool for its intended purpose.
• Do not overreach. Always keep proper footing and balance.
• Always hold the unit with both hands when operating. Keep a
firm grip on both handles or grips while cutting head is rotating.
• Keep hands, face, and feet at a distance from all moving parts. Do
not touch or try to stop the cutting attachment when it rotates.
• Do not touch the engine, gear housing or muffler. These parts get
extremely hot from operation, even after the unit is turned off.
• Do not operate the engine faster than the speed needed to
cut, trim or edge. Do not run the engine at high speed when
not cutting.
• Always stop the engine when cutting is delayed or when
walking from one cutting location to another.
• If you strike or become entangled with a foreign object, stop
the engine immediately and check for damage. Have any
damage repaired before attempting further operations. Do
not operate the unit with loose or damaged parts.
• Stop the unit, switch the engine to off, and disconnect the
spark plug for maintenance or repair.
• Use only original equipment manufacturer replacement parts
and accessories for this unit. These are available from your
authorized service dealer. Use of any unauthorized parts or
accessories could lead to serious injury to the user, or
damage to the unit, and void your warranty.
• Keep unit clean of vegetation and other materials. They may
become lodged between the cutting attachment and shield.
• To reduce fire hazard, replace a faulty muffler and spark
arrestor. Keep the engine and muffler free from grass, leaves,
excessive grease or carbon build up.
WHILE OPERATING WITH EDGER
• Inspect the unit before use. Ensure the blade is installed
correctly and secure.
• Clear the area to be edged before each use. Remove all
objects such as rocks, broken glass, nails, wire, or string which
can be thrown or become entangled in the edging attachment.
• Do not attempt to touch or stop the blade when it is rotating.
• A coasting blade can cause injury while it continues to spin after
the engine is stopped or the throttle control is released. Maintain
proper control until the blade has completely stopped rotating.
• Do not run the unit at high speed when not edging.
• Do not operate unit with a bent, cracked or dull blade.
Discard blades that are bent, warped, cracked or broken.
• Stop the engine IMMEDIATELY if you feel excessive
vibration. Vibration is a sign of trouble. Inspect thoroughly for
loose nuts, bolts or damage before continuing. Repair or
replace affected parts as necessary.
MAINTENANCE & STORAGE
* Clean cutting blades with a household cleaner to remove any
gum buildup. Oil the blade with machine oil to prevent rust.
• Never store a fueled unit inside a building where fumes may
reach an open flame or spark.
• Allow the engine to cool before storing or transporting. Be
sure to secure the unit while transporting.
• Store the unit in a dry area, locked up or up high to prevent
unauthorized use or damage, out of the reach of children.
• Never douse or squirt the unit with water or any other liquid.
Keep handles dry, clean and free from debris. Clean after
each use, see
Cleaning and Storage instructions .
• Keep these instructions. Refer to them often and use them
to instruct other users. If you loan someone this unit, also
loan them these instructions.
• Only qualified personnel should perform any repairs or
maintenance procedures that are not described in this manual.
• Check shear bolts, engine mounting bolts and other bolts at
frequent intervals for proper tightness to be sure the equipment
is in safe working condition.
• Inside a building store the machine away from ignition sources.
Allow the engine to cool before storing in any enclosure.
• Always refer to the Operator’s Manual instructions for important
details if the lawn edger is to be stored for an extended period.
• Do not attempt to repair the machine unless you have the
proper tools, and instructions for disassembly and repair of
the machine.
SAVE THESE INSTRUCTIONS