background image

• Always stop the engine and allow it to cool before filling

the fuel tank. Never remove the cap of the fuel tank, or
add fuel, when the engine is hot. Never operate the unit
without the fuel cap securely in place. Loosen the fuel
tank cap slowly to relieve any pressure in the tank.

• Mix and add fuel in a clean, well-ventilated area

outdoors where there are no sparks or flames. Slowly
remove the fuel cap only after stopping engine. Do not
smoke while fueling or mixing fuel. Wipe up any spilled
fuel from the unit immediately. 

• Avoid creating a source of ignition for spilled fuel. Do

not start the engine until fuel vapors dissipate.

• Move the unit at least 30 feet (9.1 m) from the fueling

source and site before starting the engine. Do not
smoke. Keep sparks and open flames away from the
area while adding fuel or operating the unit.

• Never start or run the unit inside a closed room or

building. Breathing exhaust fumes can kill. Operate this
unit only in a well ventilated area outdoors.

SPECIAL SAFETY WARNINGS FOR ELECTRIC
POWERHEADS AND LAWN EDGERS

• CORD SETS: Make sure your cord set is in good

condition. When using a cord set, be sure to use a
cord that is heavy enough to carry the current that your
unit will draw. An undersized cord set will cause a drop
in line voltage resulting in loss of power and
overheating. See the operator’s manual for the unit that
will power this add-on for the recommended cord size.

• Inspect all extension cords and the unit power connection

periodically. Look closely for deterioration, cuts or cracks
in the insulation. Also inspect the connections for damage.
Replace the cords if any defects or damage appear.

READ ALL INSTRUCTIONS

BEFORE OPERATING

• Carefully read and understand the operator's manual

of the unit that powers this attachment.

• Read this operating instruction manual carefully. Be

thoroughly familiar with the controls and the proper use
of the equipment. Know how to stop the unit and
disengage the controls quickly.

• Do not operate this unit when tired, ill, or under the

influence of alcohol, drugs, or medication.

• Never allow children to operate the equipment. Never

allow adults unfamiliar with the instructions to use the
unit. Never allow adults to operate the equipment
without proper instruction.

• All guards and safety attachments must be installed

properly before operating the unit.

• Inspect the unit before use. Ensure the blade is

installed correctly and secure.

• Clear the area to be edged before each use. Remove

all objects such as rocks, broken glass, nails, wire, or
string which can be thrown or become entangled in the
edging attachment.

SPECIAL SAFETY WARNINGS FOR GAS
POWERHEADS AND LAWN EDGERS

• Store fuel only in containers specifically designed and

approved for the storage of such materials.

3

• IMPORTANT SAFETY INFORMATION •

DANGER:

Failure to obey a safety warning will

result in serious injury to yourself or to others.
Always follow the safety precautions to reduce
the risk of fire, electric shock, and personal injury.

WARNING:

Failure to obey a safety warning

can result in injury to yourself and others. Always
follow the safety precautions to reduce the risk
of fire, electric shock, and personal injury. 

CAUTION:

Failure to obey a safety warning

may result in property damage or personal
injury to yourself or to others. Always follow
the safety precautions to reduce the risk of
fire, electric shock, and personal injury.

The purpose of safety symbols is to attract your attention to

possible dangers. The safety symbols, and  their explanations,
deserve your careful attention and understanding. The safety
warnings do not by themselves eliminate any danger. The
instructions or warnings they give are not substitutes for
proper accident prevention measures.

SYMBOL

MEANING

SAFETY ALERT SYMBOL:

Indicates 

danger, warning, or caution. Attention is required in
order to avoid serious personal injury. May be used
in conjunction with other symbols or pictographs. 

NOTE:

Advises you of information or instructions vital to
the operation or maintenance of the equipment.

RULES FOR SAFE OPERATION

WARNING:

To reduce the risk of electrical

shock, use only extension cords approved for
outdoor use, such as an extension cord of
cord type SW-A, SOW-A, STW-A, STOW-A,
SJW-A, SJOW-A, SJTW-W or SJTOW-A.
Extension cords are available from your local
retailer. Use only round-jacketed extension
cords approved for outdoor use.

WARNING:

When using the unit, the safety

rules must be followed. For your own safety
and that of bystanders, please read these
instructions before operating the unit. Please
keep the instructions safe for later use.

WARNING:

Gasoline is highly flammable, and

its vapors can explode if ignited. Take the
following precautions:

Содержание 769-02047





































Отзывы: