Troy-Bilt 12A-E753B063, Руководство по обслуживанию

Страница: 17 / 22

Servicing the Troy-Bilt Wide Cut 33” Combination Mower
15
underneath the unit. You will also be removing
the wheels and transmission from this position.
14.4. Using a ½ inch socket, remove the two screws
attaching the flap bracket to the frame. Remove
the flap bracket. See Figure 50.
14.5. Using a pair of needle nosed pliers, remove the
left rear cotter pin securing the lower brake rod
to the brake arm. See Figure 51.
14.6. Remove the lower brake rod from the brake arm.
Figure 50
Flap Bracket
Mounting Screws
Figure 51
Cotter Pin
Lower Brake Rod
14.7. Using a pair of needle nosed pliers remove the
hair pin securing the shift link rod to the shift rod.
See Figure 52.
14.8. Remove the tang retaining ring securing one of
the wheels. See Figure 53.
14.9. Remove the special washers and the wheel.
NOTE: Additional wheel spacing washers can
be added when required.
Figure 52
Hair Pin
Shift Rod
Shift Link Rod
Figure 53
Tang Retaining Ring