Troxler 5850v2, Руководство по эксплуатации и инструкция

Страница: 52 / 102

3–12
OUTPUT DEVICE
The compactor can send the data to a computer or serial printer via
the serial (RS-232) port, or to a USB printer or memory device
(thumb drive) via the USB port. To select the destination for the
output data, press

3

from the Data Output menu shown on page
3–10. The compactor displays:
-Output Destination-
1- Serial Port
2- USB Printer
3- Thumb Drive
Press the numeric key that corresponds to the desired output
destination. The compactor displays a brief confirmation message
and returns to the
Output Destination
menu. Press

ESC

to
return to the
Data Output
menu.
The GyroImport software
is used to convert the data on the USB
memory device to a Microsoft Excel workbook. The software may
be downloaded from the 5850v2 product page on the Troxler
website (www.troxlerlabs.com) or it can be requested from
Customer Service at
1-877-TROXLER .
OUTPUT FORMAT
The Model 5850v2 outputs data in a height-versus-gyration format,
similar to the one shown in Figure 3–1, and shows the specimen
height, or thickness, for each gyration during a compaction cycle. A
full table output includes specimen height, gyration angle, ram
pressure, and shear stress (if enabled) for each gyration.
To print the output data, press

4

from the
Data Output
menu
(shown on page 3–10). The compactor displays:
-Output Format-
1- Table
2- Formatted
3- GyroPave