TJN/.../-E*/...
1.
Remove the trim ring,
Ä
7
.
TJN/.../C: Also remove the outer casing.
2.
Set the travel stops
①
as shown.
3.
Remove the magnet from the shaft recess
and place it on the actuator, see sticker on
the actuator
[magnetic gear release]
.
4.
Set the nozzle to the correct position;
remove the travel stops.
5.
Put the travel stops back on to the correct
position; put the magnet back to its earlier
position.
For jet nozzles with modulating actuator
CM24-SX-FTR a self adjustment is required.
To start the self adjustment procedure, hold
the magnet to the point on the actuator that
is marked accordingly
[magnetic adaption]
.
Commissioning
Air terminal devices Jet nozzle Type TJN
15
